Analisis Pengendalian Kualitas dengan Metode Basic Seven  Tools  dan Failure Mode And Effect Analysis (FMEA) untuk Meminimasi Kecacatan Produk di PT X

Gatot Basuki; Nataniel Viananda Gusdi; Moch Mahsun

doi:10.54471/idarotuna.v6i1.130

Authors

Gatot Basuki Institut Teknologi Adhi Tama Surabaya, Indonesia
Nataniel Viananda Gusdi Institut Teknologi Adhi Tama Surabaya, Indonesia
Moch Mahsun Universitas Islam Syarifuddin Lumajang, Indonesia

DOI:

https://doi.org/10.54471/idarotuna.v6i1.130

Keywords:

Quality, Manufacture, Basic Seven Tools, Failure Mode and Effect Analysis, Risk Priority Number

Abstract

Quality serves as a criterion for assessing a product, and consumers use it to gauge their satisfaction with the product based on its actual use. Quality product will ensure customer satisfaction with the results. PT X operates as a sole proprietorship and is involved in the manufacturing and processing of gold to create jewelry using production machinery. One issue with current jewelry manufacturing is that product defects make up 2% of the overall output. Utilizing the Basic Seven Tools method, broken keys were identified as the most frequent type of defect. Meanwhile, the RPN (Risk Priority Number) was calculated using the Failure Mode and Effect Analysis method to rank the risk levels from highest to lowest. The two main defects for broken keys were associated with machine failure.

Downloads

Download data is not yet available.

References

Ahmad, F., Rahman, M. S., & Halim, N. H. A. (2022). Integration of Quality Control Methods in Manufacturing Industries: A Comprehensive Review. Journal of Quality Engineering, 15(3), 245-263.

Alfian, R., Nurwanto, D., & Prasetyo, H. (2021). Implementasi Basic Seven Tools untuk Menurunkan Produk Cacat pada Komponen Otomotif. Jurnal Teknik Industri, 23(2), 178-192.

Firmansyah, A., & Kristianto, T. (2022). Analisis Risiko Kegagalan Proses Produksi dengan Pendekatan FMEA pada Industri Manufaktur. Jurnal Sistem dan Manajemen Industri, 6(1), 45-58.

Harahap, R. A., Pulungan, M. R., & Hasibuan, S. (2023). Penerapan Seven Quality Control Tools untuk Peningkatan Kualitas Produk: Studi Kasus Industri Makanan. Jurnal Teknik Industri, 25(1), 67-82.

Kholil, M., & Cahyadi, R. (2020). Aplikasi Failure Mode and Effect Analysis (FMEA) dalam Mengidentifikasi Risiko Kegagalan Proses Produksi. Jurnal Optimasi Sistem Industri, 19(2), 115-127.

Kusuma, T. W., Suhardi, B., & Prasetyawan, Y. (2023). Integrasi Basic Seven Tools dan FMEA untuk Optimasi Kualitas Produksi: Studi Empiris pada Industri Manufaktur. Jurnal Teknik Industri, 25(3), 312-328.

Nugroho, A., Widodo, T., & Suliantoro, H. (2020). Analisis Implementasi Seven Tools pada Pengendalian Kualitas Produk. Jurnal Teknik Industri, 22(1), 43-55.

Maheswara, A., Prastawa, H., & Padmaningrum, D. (2021). Evaluasi Kritis Metode Pengendalian Kualitas dalam Industri Manufaktur Indonesia. Jurnal Rekayasa Sistem Industri, 10(2), 85-96.

Rahardjo, B., & Purwanto, A. (2023). Pendekatan Terintegrasi dalam Pengendalian Kualitas: Kombinasi Metode Basic Seven Tools dan FMEA. Jurnal Manajemen Kualitas, 8(2), 156-171.

Sofyan, A., & Nursyanti, R. (2021). Strategi Pengendalian Kualitas dalam Meningkatkan Daya Saing Industri Manufaktur Indonesia. Jurnal Inovasi Bisnis dan Manajemen, 4(2), 112-127.

Wijaya, D. P., & Sutapa, I. N. (2022). Implementasi FMEA untuk Pencegahan Kegagalan Proses pada Industri Elektronik. Jurnal Teknik Industri, 24(2), 201-215.